Overview — Vibration Isolation Pad 3165410-20
3165410-20 is the vibration isolation pad used on CUMMINS engine installations to damp engine vibration at the mounting point, protecting the frame and attached components from transmitted energy. We can supply this pad as well as related CUMMINS mounting parts, in stock or available on order — welcome to enquire by part number.
Parts Characteristics
The pad is molded to the original dimensions with the correct durometer and load rating, sized to support the mounted weight at the design deflection. The mounting holes align with the bracket and frame, and the material absorbs the engine frequency range without transferring it to the frame. The pad resists oil, heat and aging, holding the engine at the correct height and alignment. As an OEM-spec pad, it restores the original vibration isolation.
Applicable Models & Applications
This vibration isolation pad is used on CUMMINS engine mounts where the specified damping rating applies, including the front and rear mount positions on the relevant engine series. The family reference 3408250-20 covers the same pad duty on adjacent builds. Typical applications include generator sets, industrial engines and construction equipment. Confirm the pad size, durometer and mounting pattern against the pad removed from your engine before ordering.
Maintenance & Replacement
Inspect the pad for cracking, compression set, oil damage and loose mounting bolts. A worn pad lets engine vibration reach the frame and can crack brackets, radiator mounts and exhaust joints. When replacing, support the engine safely, fit the new pads at the original positions, and tighten the mount bolts to the specified torque. Check the engine alignment and the clearance around the fan and couplings after installation.
Price Reference (USD)
The reference price for this Vibration Isolation Pad (3165410-20) is approximately USD 8 – 35 per unit depending on size, grade, quantity and shipping destination. This is a planning estimate only — confirm current pricing and availability with our sales team before ordering.
Also in the VIBRATION ISOLATION PAD Series
3408250-20.
Value & Service
Engine mounts carry the whole powertrain, so we verify 3165410-20 against the CUMMINS mount specification and confirm the load rating and pattern before dispatch. We stock the pad and the family numbers listed above and can supply the complete mount set with bolts for a full engine mount renewal, shipped worldwide with tracking. Our team will confirm the correct pad set for your engine build.
Racer Machinery is a dedicated construction-machinery parts supplier — send us your part number and engine model, and we will confirm fitment, price and lead time for this vibration isolation pad and related CUMMINS mounting components.
