Overview – General Parts BEND YNM119803-77520
YNM119803-77520 is the HITACHI formed tube bend used on HITACHI excavators where the original formed tube route applies. We can supply this part number, in stock or available on order – welcome to enquire by part number.
Parts Characteristics
YNM119803-77520 is a formed tube bend made to the original HITACHI route, with the bend radii and end fittings matched to the machine layout. The material and wall thickness suit the fluid pressure of the circuit, and the tube holds its shape so it aligns with the original clamps and unions. The tube is formed in one piece so there are no brazed joints to fatigue under pressure pulses.
Applicable Models & Applications
This tube bend is used on HITACHI excavators where the original formed route applies, including the pipe runs covered by this number. Confirm the end fittings, the bend direction and the clamp positions against the tube removed from your machine before ordering. We can confirm the correct bend direction from the machine serial, as left and right hand routes differ.
Maintenance & Replacement
Check formed tubes for kinks, corrosion and chafing at the clamps during machine service. When replacing, fit new O-rings or seals at the unions, route the tube in the original brackets and torque the fittings to specification without twisting the bend. Support the tube in the original clamps and check the clamps themselves, as a worn clamp lets the tube chafe.
Price Reference (USD)
Typical market pricing for formed tube bend (YNM119803-77520) falls in the USD 20 – 70 range per unit. The exact quote depends on order volume, finish grade and delivery address, so please ask our team for today’s price.
Value & Service
We verify YNM119803-77520 against the original HITACHI bend profile before dispatch and can ship it together with the matching seals and clamps. Send us the machine serial and we will confirm the correct tube for your route. We stock this bend with the unions and seals, and confirm the fitting sizes before you order.
Racer Machinery is your single source for formed tube bend (YNM119803-77520) and the wider HITACHI range. We confirm the correct part for your machine before shipping, worldwide, with tracking on every order.
