Overview – SWH, LVL 3001723
For Cummins fluid and tank systems as the level switch, the Cummins SWH, LVL 3001723 provides the correct fit and performance expected from a genuine-spec replacement.
Parts Characteristics
A level switch that signals high or low level in a tank or housing, turning the level into a signal the machine acts on. It is the part that prevents overfill and run-dry faults, so a correct, sealing switch keeps the warning honest and the system protected.
Applicable Models & Applications
Fitted to Cummins level-sensing positions specifying this switch. Match the thread, voltage and switching point against your old switch – level switches differ in how they sense and seat.
Maintenance & Replacement
Inspect the switch seal and terminals at every electrical service. A switch that has failed dark hides the fault it was there to report, and the next symptom is a stopped machine.
Confirm the switching point matches the system before fitting. A switch set to the wrong level either trips early or never trips, and both are the wrong answer.
Keep the terminals clean and latched. A switch loose in its socket reads intermittently, which is the hardest fault to find once the panel is closed.
Keep the common level switches for your model on the bench. They cost little, they are the operator’s first cue, and they are exactly the item missing when a level needs sensing today.
Price Reference (USD)
As a reference, the SWH, LVL 3001723 is typically priced between USD 10 and USD 45 depending on configuration, lot size, and current exchange rates.
Value & Service
We supply brand-new level switches with the thread and setpoint confirmed against your Cummins system, so the level signal stays honest.
Ordering the Cummins SWH, LVL 3001723 from Racer Machinery means dealing with a specialist who understands General Parts and cross-references every part number for you.
