Overview – PIN; GEAR SETTING; PIN; IDLE GEAR; PIN; THRUST METAL,CR/SHF 9081605100 Series
If you run Hitachi transmission and idle-speed setting as the gear/idle-setting pin, the Hitachi PIN; GEAR SETTING; PIN; IDLE GEAR; PIN; THRUST METAL,CR/SHF 9081605100 and its series variants give you flexible sourcing without compromising fit.
Parts Characteristics
A pin used to set or lock the gear or idle position in a Hitachi transmission or engine control, holding the adjustment while the lock is applied. It is a small locating part, so a correct pin keeps the setting from drifting and the control from walking out of its range.
Applicable Models & Applications
Fitted to Hitachi positions specifying this gear/idle-setting pin. Match the diameter and length against your old pin – setting pins differ in how they locate and retain.
Maintenance & Replacement
Replace a pin that shows a worn or elongated locating feature. A pin that has taken a set no longer holds the adjustment, and the setting drifts the first time the machine reacts.
Confirm the pin seats fully before applying the lock. A pin one step short leaves the control loosely retained and the engine will not hold its setting.
Keep the setting pins clear of burrs on fit. A pin that binds in its bore cocks the adjuster and the setting reads wrong.
Keep the common gear/idle-setting pins for your model on the bench. They are cheap, they are load-critical, and they are exactly the part missing when a setting needs locking today.
Price Reference (USD)
For planning purposes, allocate USD 3 to USD 20 per PIN; GEAR SETTING; PIN; IDLE GEAR; PIN; THRUST METAL,CR/SHF 9081605100, excluding local import duties.
Value & Service
We supply brand-new gear/idle-setting pins with the diameter confirmed against your Hitachi control, so the adjustment stays locked and true.
Related interchange numbers for the PIN; GEAR SETTING; PIN; IDLE GEAR; PIN; THRUST METAL,CR/SHF: 9098786260, 1097490251 – confirm the exact variant against your model’s parts book before ordering.
Avoid counterfeit risk – Racer Machinery sources the Hitachi PIN; GEAR SETTING; PIN; IDLE GEAR; PIN; THRUST METAL,CR/SHF 9081605100 through verified channels and documents each shipment.
