Overview —
Overview
Replacement Part is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This part is applied across Caterpillar equipment wherever the original component is fitted, and it is dimensionally interchangeable with that unit for a clean, direct swap. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Because this part works continuously inside the machine, catch a developing issue while the machine is already opened up for service. Compare clearance, condition and sealing each time, and renew the unit when measurement or appearance moves outside the maker's range. Early signs it may need attention: A machine that runs, but only after workarounds — flags, shims or extra torque — that mask a tired part; Unusual noise, poor performance or a developing leak that points at the failing component; Recurring minor faults on nearby components that trace back to this unit degrading the circuit.
Installation Essentials
Confirm the part number against your machine model and serial number before ordering. Work on a clean machine, with the engine off and the relevant system depressurised or drained first. Fit new seals, gaskets or O-rings and torque every fastener to the manual's figure. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Replacement Part (listed under Replacement Part) is approximately USD 235 – 540 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Racer Machinery is a dedicated construction-machinery parts supplier — we keep a complete range of spare part in stock and verify it against your machine before dispatch. Tell us your part number and model and we will confirm fitment, price and lead time.
