Overview – OIL INLET HOSE 4914427-20
For Cummins lubrication and hydraulic positions as the oil inlet hose, the Cummins OIL INLET HOSE 4914427-20 provides the correct fit and performance expected from a genuine-spec replacement.
Parts Characteristics
An oil inlet hose that carries lubricating or hydraulic oil from the source to the component, holding the flow path and the seal at the bend. It is the oil line that, kinked or leaking, starves a branch, so a true, sealing hose keeps the oil on the right side of the wall.
Applicable Models & Applications
Used at Cummins lubrication positions specifying this oil inlet hose. Match the bore, the bend and the seal against your old hose – oil hoses differ in how they route and seal.
Maintenance & Replacement
Inspect the hose for a soft wall and a weeping joint at every lubrication service. A hose that has begun to leak loses oil, and the loss is what lets the branch run dry.
Replace the seals together with the hose where the kit calls for it. A new hose onto a crushed old seal still leaks, and the leak is what stains the block.
Confirm the hose routes clear of heat and pinch points and seats square on fit. A hose clamped into a danger zone fails faster than the one it replaced.
Keep common oil inlet hoses for your lubrication system on the bench. They are cheap, they protect an expensive loop, and they are exactly the part missing when a branch needs feeding today.
Price Reference (USD)
As a reference, the OIL INLET HOSE 4914427-20 is typically priced between USD 10 and USD 60 depending on configuration, lot size, and current exchange rates.
Value & Service
We supply brand-new Cummins oil inlet hoses with the bore and bend confirmed against your lubrication system, so the oil branch stays sealed and fed.
Avoid counterfeit risk – Racer Machinery sources the Cummins OIL INLET HOSE 4914427-20 through verified channels and documents each shipment.
