Overview — Replacement Part 4933782
Overview
Replacement Part 4933782 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
Used across a wide range of Cummins models and systems, this unit follows the same mounting and duty as the original, so fitment stays predictable for shops and operators. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Service this part against the machine's own care schedule; keep surrounding surfaces clean and the fixings torqued, and replace it when wear is visible rather than pushing it to the point of failure. Early signs it may need attention: Unusual noise, poor performance or a developing leak that points at the failing component; Visible wear, corrosion or damage that is accelerating on the part and its neighbours; A machine that runs, but only after workarounds — flags, shims or extra torque — that mask a tired part.
Installation Essentials
Confirm the part number against your machine model and serial number before ordering. Work on a clean machine, with the engine off and the relevant system depressurised or drained first. Fit new seals, gaskets or O-rings and torque every fastener to the manual's figure. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Replacement Part (listed under 4933782) is approximately USD 245 – 565 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 4933782
Also in the Replacement Part Series
Same-series, real numbers we also supply (always confirm fit and interchange against your machine): 5286677, 4936218, 3969110, 3966520, 3949718, 3949098
Whether you need one unit or a fleet batch, Racer Machinery verifies every spare part against the machine it is meant for, so you buy the right match the first time. Send us your part number and machine model for a quote.
