نظرة عامة – General Parts PINZI 107695X Series
The Cummins PINZI 107695X is part of a proven family of components used across Cummins assembly and alignment positions as the locating/dowel pin, and several interchangeable part numbers share the same fitment.
Parts Characteristics
A hardened locating (dowel) pin that aligns two mating components to the correct position before they are bolted, carrying the shear so the joint cannot drift. It is a tiny, precise part, so a correct, straight pin keeps the assembly located and the bolt holes from elongating.
Applicable Models & Applications
Fitted to Cummins positions specifying this locating pin. Match the diameter, the length and the fit against your old pin – locating pins differ in how they locate and retain.
Maintenance & Replacement
Replace pins as a set where they work in a group. A new pin against a worn hole seats unevenly and the assembly drifts.
Inspect the hole the pin runs in, not just the pin. A perfect pin into an elongated hole still lets the joint shift, and the shift is what elongates the bolt holes.
Confirm the pin seats fully before torquing the joint. A pin one step short leaves the assembly loosely retained and the bolts take the shear.
Keep the common locating pins for your assembly on the bench. They cost almost nothing, they are load-critical, and an assembly open on a pin is a machine waiting on a small part.
Price Reference (USD)
As a reference, the PINZI 107695X is typically priced between USD 2 and USD 12 depending on configuration, lot size, and current exchange rates.
Value & Service
We supply brand-new Cummins locating pins with the diameter and fit confirmed against your assembly, so the alignment stays locked and true.
The PINZI family includes 3634269-20; we can cross-check which one matches your serial number.
Racer Machinery helps you standardize Cummins General Parts procurement; the PINZI 107695X can be set up as a repeat order for predictable servicing.
