نظرة عامة – WING NUT 7/16-20 Q01453-10
The Cummins WING NUT 7/16-20 Q01453-10 is specified for Cummins cover and panel positions and is supplied to the original dimensional and material standard.
Parts Characteristics
A wing nut 7/16-20 that clamps the cover so the joint stays finger-tight in the fastening, so the nut face stays tight and captive. It carries the service life the fastening depends on, so a true, correctly specified unit keeps the vibrate loose from the cover weeps and the access opens.
Applicable Models & Applications
Used at Cummins General Parts positions specifying this WING NUT 7/16-20. Match the form, fit and contents against your old unit – General Parts parts differ in how they seat and bolt.
Maintenance & Replacement
Inspect for wear and a loose fit at every service. A wing nut 7/16-20 that has begun to fail lets the nut face drift, and the drift is what causes the vibrate loose.
Confirm the wing nut 7/16-20 seats and the fixings hold on fit. A unit canted in its bolts lets the nut face move, and the move is where it fails.
Replace rather than repair a failed one where the part allows. A wing nut 7/16-20 reused past its life returns the same fault, and the fault is what stops the machine.
Keep the correct wing nut 7/16-20 for your general parts on the bench. It is cheaper than the downstream failure, and it is exactly the part missing when a service needs doing today.
Price Reference (USD)
The WING NUT 7/16-20 Q01453-10 is offered in the USD 0.5-6 range, with quantity breaks available for fleet maintenance programs.
Value & Service
We supply brand-new Cummins WING NUT 7/16-20 with the form, fit and contents confirmed against your general parts, so the nut face stays tight and captive.
The WING NUT 7/16-20 Q01453-10 is just one of thousands of Cummins General Parts stocked by Racer Machinery, all backed by technical advice from people who work with these engines daily.
