Overview – BKT, FAN 132037
For Cummins fan and fan-drive mounting on the front of the engine, the Cummins BKT, FAN 132037 provides the correct fit and performance expected from a genuine-spec replacement.
Parts Characteristics
A fan mounting bracket that carries the engine fan and locates it square to the shroud. It absorbs the vibration of a spinning fan, so a failed bracket lets the fan wobble and eat the radiator.
Applicable Models & Applications
Fitted to Cummins fan-mounting arrangements at the corresponding position. Match the bracket shape, hole pattern and fan-centre distance against your old part – fan brackets look alike but the fan standoff varies.
Maintenance & Replacement
Inspect the bracket for cracks at the bolt holes and witness marks that no longer line up. A support that has begun to move lets the fan drift, and the blade tips find the shroud within hours.
Re-torque the mounting bolts to specification, especially after any front-end work. A support that has loosened hammers its own bolts loose and cracks the casting it bolts to.
Check fan alignment to the shroud after fitting. A bracket a few millimetres out throws the fan off-axis, and the resulting imbalance shortens both fan and radiator life.
Keep the support for your engine on the shelf. It is a structural part, not a trim piece, and a failed one turns an inexpensive bracket into a radiator replacement.
Price Reference (USD)
As a reference, the BKT, FAN 132037 is typically priced between USD 15 and USD 60 depending on configuration, lot size, and current exchange rates.
Value & Service
We supply brand-new fan mounting brackets with the hole pattern and standoff confirmed against your Cummins engine, so the fan runs true and the radiator stays intact.
Racer Machinery ships the Cummins BKT, FAN 132037 to over 100 countries, with packaging built for the rough handling of international freight.
