Overview – GASKET, SPACER 3331969 Series
If you run Cummins engine and flange positions as the spacer gasket, the Cummins GASKET, SPACER 3331969 and its series variants give you flexible sourcing without compromising fit.
Parts Characteristics
A spacer gasket that sets the gap and seals the joint between two flanges, holding the alignment and the seal together. It is the shim that, correct, keeps the faces parallel and the fluid in, so a true, flat gasket keeps the joint tight.
Applicable Models & Applications
Used at Cummins engine positions specifying this spacer gasket (series). Match the bore, the thickness and the bolt pattern against your old gasket – spacer gaskets differ in how they sit and seal.
Maintenance & Replacement
Replace the gasket at every opening – a reused one never seals as well as a fresh one. A gasket carried over weeps, and the weep is what stains the block.
Confirm the thickness is correct on fit. A spacer gasket too thin lets the faces clash, too thick and the bolt cannot draw the joint home.
Clean both faces before fitting. A gasket seated on old sealant or grit cannot compress true and the joint leaks.
Keep the correct spacer gaskets for your engine on the shelf. They cost almost nothing, they protect an expensive flange, and a joint open on a gasket is a machine waiting on a small part.
Price Reference (USD)
Budget roughly USD 4 to USD 30 for a GASKET, SPACER 3331969; volume orders and stock status can move this range either way.
Value & Service
We supply brand-new Cummins spacer gaskets with the bore and thickness confirmed against your engine, so the joint stays aligned and sealed.
Related interchange numbers for the GASKET, SPACER: 3331970 – confirm the exact variant against your model’s parts book before ordering.
Choose Racer Machinery for the GASKET, SPACER 3331969 and other Cummins Engine Parts – genuine-spec replacements sourced and inspected before they leave the warehouse.
