Product Overview — 5349597
Overview
Crankshaft 5349597 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This crankshaft is the main crankshaft for Cummins engine builds, carrying firing loads through the main bearings. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
During an overhaul, magnitude-flux and measure the journals for taper, ovality and bearing clearance; grind or replace when dimensions fall outside factory limits. Early signs it may need attention: A deep knocking that gets louder under load usually indicates a worn or spun main bearing; Low oil pressure at hot idle can follow insufficient journal clearance; Excessive end float shows as an audible clunk when the clutch or torque converter engages.
Installation Essentials
Work on a clean machine with the engine off and the relevant system drained or depressurised as required, and confirm the part number against your machine model and serial number before ordering. Pair it with correctly-sized bearings and clean, present oil galleries. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Crankshaft (listed under 5349597) is approximately USD 450 – 960 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 5349597
Also in the Crankshaft Series
Same-series, real numbers we also supply (always confirm fit and interchange against your machine): 5443207, 5349603, 4980384
Whether you need one unit or a fleet batch, Racer Machinery verifies every Crankshaft against the machine it is meant for, so you buy the right match the first time. Send us your part number and machine model for a quote.
Product Images
