Overview – ADJUSTING SHIM 4374410 Series
Built to Hitachi specifications, the ADJUSTING SHIM 4374410 serves Hitachi linkage and clearance positions; the cross-referenced series below covers the most common substitutions.
Parts Characteristics
A adjusting shim that sets the running clearance so the assembly stays within spec in the adjustment and clearance, so the shim stack stays sized and seated. It carries the service life the adjustment and clearance depends on, so a true, correctly specified unit keeps the crush and thin out from the clearance opens and the part wears early.
Applicable Models & Applications
Used at Hitachi General Parts positions specifying this ADJUSTING SHIM. Match the form, fit and contents against your old unit – General Parts parts differ in how they seat and bolt.
Maintenance & Replacement
Inspect for wear and a loose fit at every service. A adjusting shim that has begun to fail lets the shim stack drift, and the drift is what causes the crush and thin out.
Confirm the adjusting shim seats and the fixings hold on fit. A unit canted in its bolts lets the shim stack move, and the move is where it fails.
Replace rather than repair a failed one where the part allows. A adjusting shim reused past its life returns the same fault, and the fault is what stops the machine.
Keep the correct adjusting shim for your general parts on the bench. It is cheaper than the downstream failure, and it is exactly the part missing when a service needs doing today.
Price Reference (USD)
As a reference, the ADJUSTING SHIM 4374410 is typically priced between USD 1 and USD 12 depending on configuration, lot size, and current exchange rates.
Value & Service
We supply brand-new Hitachi ADJUSTING SHIM with the form, fit and contents confirmed against your general parts, so the shim stack stays sized and seated.
The ADJUSTING SHIM family includes 4392326, 4662108, 4662109, ZA00002146, ZA00002147, ZA00002148, ZA00002149, ZA00002150, ZA00002151, ZA00002152, ZA00002153, ZA00002154, ZA00002155, ZA00002156, ZA00002157, ZA00002158, ZA00002159; we can cross-check which one matches your serial number.
Avoid counterfeit risk – Racer Machinery sources the Hitachi ADJUSTING SHIM 4374410 through verified channels and documents each shipment.
