Product Overview — 155-9107
Overview
Piston 155-9107 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
These pistons suit Caterpillar engines, sized to the bore grade so compression, ring position and oil control match the block. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Pair pistons with fresh rings and liners during overhaul, and set ring end gaps and side clearance to spec; inspect for slap, scuffing or a cocked ring when performance drops. Early signs it may need attention: A cold piston slap that lessens as the engine warms; Increased blow-by and blue smoke when ring lands or grooves wear; A penetrating, heavy knock that worsens under load with a scored skirt.
Installation Essentials
Work on a clean machine with the engine off and the relevant system drained or depressurised as required, and confirm the part number against your machine model and serial number before ordering. Clean the ring grooves to remove carbon and measure end gaps before assembly. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Piston (listed under 155-9107) is approximately USD 180 – 395 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 155-9107
Also in the Piston Series
Same-series, real numbers we also supply (always confirm fit and interchange against your machine): 0R-7795, 1559107
Racer Machinery is a dedicated construction-machinery parts supplier — we keep a complete range of Piston in stock and verify it against your machine before dispatch. Tell us your part number and model and we will confirm fitment, price and lead time.
