Overview – INLET FITTING 4067950
The Cummins INLET FITTING 4067950 is specified for Cummins hydraulic positions as the inlet fitting directing fluid into the component and is supplied to the original dimensional and material standard.
Parts Characteristics
A inlet fitting that directs fluid into the component at the sized bore and joint in the hydraulic circuit, so the fluid entry stays aligned and leak-free. It carries the service life the hydraulic circuit depends on, so a true, correctly specified unit keeps the weep and scale from the circuit loses pressure and flow.
Applicable Models & Applications
Used at Cummins Hydraulic Parts positions specifying this INLET FITTING. Match the bore, port and seal face against your old unit – Hydraulic Parts parts differ in how they seat and bolt.
Maintenance & Replacement
Inspect for wear and a loose fit at every service. A inlet fitting that has begun to fail lets the fluid entry drift, and the drift is what causes the weep and scale.
Confirm the inlet fitting seats and the fixings hold on fit. A unit canted in its bolts lets the fluid entry move, and the move is where it fails.
Replace rather than repair a failed one where the part allows. A inlet fitting reused past its life returns the same fault, and the fault is what stops the machine.
Keep the correct inlet fitting for your hydraulic parts on the bench. It is cheaper than the downstream failure, and it is exactly the part missing when a service needs doing today.
Price Reference (USD)
Budget roughly USD 10 to USD 100 for a INLET FITTING 4067950; volume orders and stock status can move this range either way.
Value & Service
We supply brand-new Cummins INLET FITTING with the bore, port and seal face confirmed against your hydraulic parts, so the fluid entry stays aligned and leak-free.
Racer Machinery maintains a deep inventory of Cummins Hydraulic Parts, and the INLET FITTING 4067950 is available with same-week dispatch for urgent repairs.
