Overview — 600MM-20Y-32-02051, 20Y-32-02051
Overview
Track Chain 600MM-20Y-32-02051, 20Y-32-02051 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This track chain is the running core of the Komatsu undercarriage, matching the machine's pitch, link width and grouser spec. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Measure track chain elongation and pin/bushing wear at each undercarriage service; replace, or rebuild the chain, when elongation exceeds specification to avoid sprocket and roller damage. Early signs it may need attention: Elongated pin holes and bushing wear measured against the maker's limit; An audible 'surgical' clank and jerky travel from a stretched chain and worn sprockets; Seized or loose pins that show as speeding or erratic drive.
Installation Essentials
Work on a clean machine with the engine off and the relevant system drained or depressurised as required, and confirm the part number against your machine model and serial number before ordering. Set correct track sag after fitting to protect the whole running gear. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Track Chain (listed under 600MM-20Y-32-02051, 20Y-32-02051) is approximately USD 565 – 1235 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 600MM-20Y-32-02051
- 20Y-32-02051
Also in the Track Chain Series
Same-series, real numbers we also supply (always confirm fit and interchange against your machine): 20Y-32-31120
For dependable sourcing of Track Chain, Racer Machinery combines verified interchangeability with quick dispatch and pre-shipment inspection. Request a quote and our team will confirm availability in one step.
