Product Overview — 707-01-0a450
Overview
Hydraulic Cylinder 707-01-0a450 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This cylinder is used on Komatsu machines for boom, bucket, tilt or auxiliary functions, sized to the bore/rod/stroke of the original. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Inspect rod surface, seals and gland at service intervals; replace the seal kit and re-hone/plating as needed when leaks, drift or rod scoring appear, typically after heavy cycles. Early signs it may need attention: A cylinder that drifts or settles under load indicates seal or spool bypass; Oil filming the rod or pooling under the gland means the rod and rod seals are worn; Blown seals can follow a scratched or weld-spattered rod entering the gland.
Installation Essentials
Work on a clean machine with the engine off and the relevant system drained or depressurised as required, and confirm the part number against your machine model and serial number before ordering. Protect the rod from weld splatter and impact; a scored rod destroys fresh seals fast. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Hydraulic Cylinder (listed under 707-01-0a450) is approximately USD 205 – 460 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 707-01-0a450
Whether you need one unit or a fleet batch, Racer Machinery verifies every Hydraulic Cylinder against the machine it is meant for, so you buy the right match the first time. Send us your part number and machine model for a quote.
