Overview — Gasket 3600467
3600467 is the gasket used on CUMMINS engines to seal the specified joint between components, preventing fluid or gas leakage at the mating face. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Parts Characteristics
The gasket is cut to the original profile with the correct holes and passages, sized to cover the full sealing face. The material is selected for the operating temperature and fluid of the joint, holding compression without extruding or deteriorating. The surface is finished to seat evenly against both mating faces, and the thickness matches the original specification so clamping loads are maintained. As an OEM-spec gasket, it restores the designed seal for the joint.
Applicable Models & Applications
This gasket is used on CUMMINS engine families at the specified sealing joint, covering construction, industrial, generator and marine applications. The family reference 3600468 covers the same sealing duty on the adjacent build. Confirm the gasket profile and the joint position against the gasket removed from your engine before ordering.
Maintenance & Replacement
Replace the gasket whenever the joint is opened, and clean both mating faces thoroughly before fitting. Fit the gasket dry or with the specified sealant, aligning the holes and passages correctly, and tighten the fasteners in the specified sequence to the correct torque. Check for leaks after a heat cycle, and re-torque where the manufacturer requires. Never reuse a compressed gasket, since it will not seal correctly a second time.
Price Reference (USD)
The reference price for this Gasket (3600467) is approximately USD 5 – 40 per unit depending on material, size, quantity and shipping destination. This is a planning estimate only — confirm current pricing and availability with our sales team before ordering.
Also in the GASKET Series
3600468.
Value & Service
A gasket is a small part that stops expensive leaks, so we verify 3600467 against the original CUMMINS profile and confirm the material and thickness before dispatch. We stock the gasket and the family number 3600468 and can consolidate it with other engine service parts into one tracked shipment. Our team can confirm the correct gasket for your joint if you are unsure of the position.
Racer Machinery is a dedicated construction-machinery parts supplier — send us your part number and engine model, and we will confirm fitment, price and lead time for this gasket and related CUMMINS sealing components.
