Overview – ROTOR, SHAFT WHEEL 3536624
The Cummins ROTOR, SHAFT WHEEL 3536624 is a direct replacement used in Cummins transmission and brake positions as the shaft-wheel rotor, with no modification required at installation.
Parts Characteristics
A shaft-wheel rotor that carries the rotating mass the brake or the pump acts on, holding the surface the lining or the vane runs against. It carries the speed and the load, so a true, balanced rotor keeps the action smooth and the heat managed.
Applicable Models & Applications
Used at Cummins transmission positions specifying this shaft-wheel rotor. Match the bore, the face and the balance against your old rotor – shaft-wheel rotors differ in how they key and run.
Maintenance & Replacement
Inspect the rotor for a scored face and a cracked hub at every service. A rotor that has begun to run out shakes the action, and the shake is what wears the lining.
Replace the rotor rather than turn a warped one past spec. A rotor that has lost its face runs hot, and the heat is what cooks the seal.
Confirm the rotor seats true and is torqued on fit. A rotor mounted off the hub runs out and the whole circuit pulses.
Keep the correct shaft-wheel rotors for your transmission on the shelf. They are load-critical, and a machine stopped on a rotor is a machine waiting on a part.
Price Reference (USD)
Budget roughly USD 40 to USD 220 for a ROTOR, SHAFT WHEEL 3536624; volume orders and stock status can move this range either way.
Value & Service
We supply brand-new Cummins shaft-wheel rotors with the bore and face confirmed against your transmission, so the action stays smooth and balanced.
From quote to delivery, Racer Machinery treats the Cummins ROTOR, SHAFT WHEEL 3536624 like a critical component, because on a job site it is.
