Overview – CABLE CLAMP 0332-4043
Engineered for Hitachi cable-routing positions, the Cummins CABLE CLAMP 0332-4043 meets the tolerances your equipment was designed around.
Parts Characteristics
A cable clamp that holds the cable run so it stays located away from moving parts in the cable routing, so the cable route stays routed and held. It carries the service life the cable routing depends on, so a true, correctly specified unit keeps the fatigue and release from the cable drops and chafes through.
Applicable Models & Applications
Used at Cummins Hydraulic Parts positions specifying this CABLE CLAMP. Match the bore, port and seal face against your old unit – Hydraulic Parts parts differ in how they seat and bolt.
Maintenance & Replacement
Inspect for wear and a loose fit at every service. A cable clamp that has begun to fail lets the cable route drift, and the drift is what causes the fatigue and release.
Confirm the cable clamp seats and the fixings hold on fit. A unit canted in its bolts lets the cable route move, and the move is where it fails.
Replace rather than repair a failed one where the part allows. A cable clamp reused past its life returns the same fault, and the fault is what stops the machine.
Keep the correct cable clamp for your hydraulic parts on the bench. It is cheaper than the downstream failure, and it is exactly the part missing when a service needs doing today.
Price Reference (USD)
Budget roughly USD 1 to USD 8 for a CABLE CLAMP 0332-4043; volume orders and stock status can move this range either way.
Value & Service
We supply brand-new Cummins CABLE CLAMP with the bore, port and seal face confirmed against your hydraulic parts, so the cable route stays routed and held.
Backed by Racer Machinery’s parts expertise, the Cummins CABLE CLAMP 0332-4043 is ready to order with clear documentation and fast delivery to your site.
