Overview — 2D2511
Overview
Valve 2D2511 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This valve is used in the hydraulic/pneumatic circuit of Caterpillar machines, controlling pressure, flow or direction. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Inspect valve spools, solenoids, springs and pilot pressures at service intervals; clean, adjust or replace when the function drifts, sticks or jumps, and set relief pressures with a gauge. Early signs it may need attention: A function that drifts, creeps or drops under load, often a spool or check valve issue; A sticking spool that makes the function jumpy, slow or unresponsive; Whining or cavitation when a valve internal leaks or the flow path is blocked.
Installation Essentials
Work on a clean machine with the engine off and the relevant system drained or depressurised as required, and confirm the part number against your machine model and serial number before ordering. Keep the operator clean and use the specified pilot or control oil grade. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Valve (listed under 2D2511) is approximately USD 20 – 55 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 2D2511
Also in the Valve Series
Same-series, real numbers we also supply (always confirm fit and interchange against your machine): 296-4915
Buy the right Valve the first time — Racer Machinery confirms fit against your machine before dispatch and backs every order with inspected, verified parts. Send your part number and model for live stock and pricing.
