Product Overview — 6I4952
Overview
Replacement Part 6I4952 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This part is applied across Caterpillar equipment wherever the original component is fitted, and it is dimensionally interchangeable with that unit for a clean, direct swap. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Give this part the same attention the machine's other load-bearing parts get: check it whenever the machine is apart, keep mating faces clean and torqued, and renew it before wear passes the point of no return. Early signs it may need attention: Inspections that show scoring, pitting, distortion or hardening on the working surfaces; A machine that runs, but only after workarounds — flags, shims or extra torque — that mask a tired part; Recurring minor faults on nearby components that trace back to this unit degrading the circuit.
Installation Essentials
Confirm the part number against your machine model and serial number before ordering. Work on a clean machine, with the engine off and the relevant system depressurised or drained first. Fit new seals, gaskets or O-rings and torque every fastener to the manual's figure. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Replacement Part (listed under 6I4952) is approximately USD 250 – 575 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 6I4952
Also in the Replacement Part Series
Same-series, real numbers we also supply (always confirm fit and interchange against your machine): 6I4950, 6I4953, 6I4955
For dependable sourcing of spare part, Racer Machinery combines verified interchangeability with quick dispatch and pre-shipment inspection. Request a quote and our team will confirm availability in one step.
