Overview — Replacement Part 2052718
Overview
Replacement Part 2052718 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This part is applied across Hitachi equipment wherever the original component is fitted, and it is dimensionally interchangeable with that unit for a clean, direct swap. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Give this part the same attention the machine's other load-bearing parts get: check it whenever the machine is apart, keep mating faces clean and torqued, and renew it before wear passes the point of no return. Early signs it may need attention: A change in machine behaviour that the service manual ties to this part; Recurring minor faults on nearby components that trace back to this unit degrading the circuit; Inspections that show scoring, pitting, distortion or hardening on the working surfaces.
Installation Essentials
Confirm the part number against your machine model and serial number before ordering. Work on a clean machine, with the engine off and the relevant system depressurised or drained first. Fit new seals, gaskets or O-rings and torque every fastener to the manual's figure. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Replacement Part (listed under 2052718) is approximately USD 230 – 525 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 2052718
Whether you need one unit or a fleet batch, Racer Machinery verifies every spare part against the machine it is meant for, so you buy the right match the first time. Send us your part number and machine model for a quote.
