Turbocharger – 4033195H
This turbocharger (Part Number: 4033195H) is a high-quality replacement component for diesel engines and construction equipment. Manufactured to meet or exceed OEM specifications, it ensures reliable performance and long service life in demanding operating conditions.
Applications
turbocharged diesel engines in excavators, wheel loaders, trucks and generator sets. The turbocharger uses exhaust energy to compress intake air, increasing power output and improving fuel efficiency. A healthy turbo is essential for rated engine performance and low smoke operation. Verify the part number against your engine serial number before ordering.
Part Number Reference
- Primary Part Number: 4033195H
We also supply turbochargers, turbo cartridges (CHRA), repair kits and gasket sets for most major engine brands. Send us your engine model and turbo part number and our team will confirm the correct unit.
Technical Specifications
- Product Type: Turbocharger
- Part Number: 4033195H
- Quality: OEM specification
- Condition: New
Usage Notes
- A failed turbo is usually a symptom, not the root cause – inspect oil supply, air filtration and exhaust restriction before installing the replacement.
- Replace the oil feed and return lines whenever the turbo is replaced.
- Never use gasket sealant on turbo oil connections.
- After any turbo failure, drain and flush the oil system and install a new oil filter.
Installation Guide
- Change the engine oil and oil filter before installing the turbocharger – contaminated oil destroys turbos.
- Replace or thoroughly clean the oil supply and return lines; coked oil in the lines is a common cause of repeat failures.
- Pre-lube the turbo: pour clean engine oil into the oil inlet while rotating the shaft by hand.
- Replace all gaskets between the turbo, exhaust manifold and exhaust outlet.
- Before installation, check that the wheels rotate freely and the shaft play is within specification.
- Tighten all fasteners to the specified torque values; exhaust bolts loosen with heat cycles.
- After installation, crank the engine without starting until oil pressure is established, then start and let it idle.
- Let the engine idle for several minutes and check for oil leaks at both the inlet and outlet connections.
- After hard work, allow 1-3 minutes of idle cooling before shutting the engine down to protect the turbo bearings.
Reference Price Range
The reference price for this turbocharger is approximately USD 350 – 1,200 per unit, depending on configuration, availability and shipping destination. Contact our sales team for a precise quotation. Volume discounts are available for fleet operators and repair shops.
Maintenance Tips
- Change engine oil and filters at the recommended intervals using the specified oil grade.
- Keep the air filter in good condition – dust ingestion erodes the compressor wheel.
- Avoid full throttle immediately after a cold start.
- Allow idle cool-down before shutdown after heavy load operation.
- Investigate blue or black smoke, power loss or whining noise immediately.
Warranty
All products supplied by us are covered by a 12-month warranty against manufacturing defects in materials and workmanship.
Shipping and Delivery
In-stock items ship within 24-48 hours via express freight (DHL, FedEx, or UPS). Standard delivery time is 5-10 business days worldwide.
Why Choose Our Products?
- Direct OEM replacement with guaranteed fitment and performance
- Rigorous quality testing before shipment
- Competitive pricing with factory-direct supply chain
- Technical support available for installation and troubleshooting
- Proven reliability with thousands of units supplied worldwide
