Overview – RETAINER RING 135169 Series
If you run Cummins rotating and reciprocating positions as the retainer ring holding a bearing or component axially, the Cummins RETAINER RING 135169 and its series variants give you flexible sourcing without compromising fit.
Parts Characteristics
A retainer ring that holds a bearing or component in its bore, so the part stays axially located under load. It carries the stop that the assembly depends on, so a true, correctly seated ring keeps the component from walking out.
Applicable Models & Applications
Used at Cummins rotating and reciprocating positions specifying this retainer ring (series). Match the size, the section and the groove against your old ring – retainer rings differ in how they seat and carry.
Maintenance & Replacement
Inspect for a relaxed gap and a scored groove at every strip-down. A ring that has begun to spread lets the part drift, and the drift is what loads the neighbour.
Confirm the ring seats fully in its groove on fit. A ring popped only part way lets the component move, and the move is what damages the bore.
Replace rather than reuse a spread one. A ring that has taken a set will not hold, and the component is what walks out.
Keep common retainer rings for your assembly on the bench. They cost almost nothing, they locate an expensive part, and an assembly open on a ring is a machine waiting on a small part.
Price Reference (USD)
For planning purposes, allocate USD 3 to USD 25 per RETAINER RING 135169, excluding local import duties.
Value & Service
We supply brand-new Cummins retainer rings with the size confirmed against your assembly, so the component stays located.
Related interchange numbers for the RETAINER RING: 156676, E4395125 – confirm the exact variant against your model’s parts book before ordering.
Avoid counterfeit risk – Racer Machinery sources the Cummins RETAINER RING 135169 through verified channels and documents each shipment.
