Overview — 7X2652
Overview
Replacement Part 7X2652 is a commonly used spare part in construction machinery. We can supply all the original and replacement part numbers listed below, in stock or available on order — welcome to enquire by part number.
Applicable Models & Applications
This replacement component is used on Caterpillar machines and systems, matching the original fit and function. Suitable for the corresponding machine model and configuration — please verify the machine model, serial number and part number match before ordering.
Maintenance & Replacement
Because it is exposed to debris, heat and load on every shift, this part should be treated as inspectable-and-replaceable rather than fit-and-forget. Compare its condition against the manual's wear limits each time the machine is serviced. Early signs it may need attention: A machine that runs, but only after workarounds — flags, shims or extra torque — that mask a tired part; A part that no longer holds its original clearance, tension or seal after repeated service intervals; Rising fuel or oil consumption, drifting pressures or inconsistent operation that this part controls.
Installation Essentials
Confirm the part number against your machine model and serial number before ordering. Work on a clean machine, with the engine off and the relevant system depressurised or drained first. Fit new seals, gaskets or O-rings and torque every fastener to the manual's figure. After installation, run the machine and check for leaks, unusual noise or abnormal travel before returning it to service, and retighten where the manual calls for it after the first hours of operation.
Reference Price
The reference price for this Replacement Part (listed under 7X2652) is approximately USD 240 – 545 per unit, depending on configuration, quantity and shipping destination. This is an estimate for planning purposes — please confirm current pricing and availability with our sales team before ordering.
Available Part Numbers
- 7X2652
Buy the right spare part the first time — Racer Machinery confirms fit against your machine before dispatch and backs every order with inspected, verified parts. Send your part number and model for live stock and pricing.
