Overview – VALVE-BALL (1/2 INCH NPT) 504-0213
Engineered for Cummins lube-oil and coolant drain and sample points, the Cummins VALVE-BALL (1/2 INCH NPT) 504-0213 meets the tolerances your equipment was designed around.
Parts Characteristics
A 1/2-inch NPT ball valve with a lever handle and a body rated to system pressure. The full-bore design gives an unrestricted flow path for draining, sampling or isolating a service port.
Applicable Models & Applications
Fitted at engine drain and sample points so oil, coolant or DEF can be drawn or isolated cleanly. Common on Cummins service ports where a positive shutoff is needed.
Maintenance & Replacement
Exercise the handle through its quarter-turn at every service so it does not seize, and check the stem seal for weepage. Confirm the valve seats fully and does not bind, because a drain or sample point you cannot close cleanly turns a routine service into a mess.
Replace the valve if it will not seat fully, shows a leak at the stem or body, or has a handle that has frozen. A leaking drain valve lets oil, coolant or DEF escape every time you open the port.
To swap it, shut the upstream isolation, relieve pressure, and drain the downstream side. Unscrew the valve from its ports – note whether it is male or female – apply sealant to the new valve’s threads, install and torque it, then reopen slowly and check for leaks under pressure.
Keep the handle accessible and never force a seized one. Replace rather than repair, and stock the sizes these engines actually use so the right shutoff is a click away instead of a parts-hunt.
Price Reference (USD)
For planning purposes, allocate USD 8 to USD 30 per VALVE-BALL (1/2 INCH NPT) 504-0213, excluding local import duties.
Value & Service
We supply sealed, pressure-rated valves in the sizes these engines actually use, so the right shutoff is a click away instead of a parts-hunt.
When you need a dependable VALVE-BALL (1/2 INCH NPT) 504-0213 for your Cummins Hydraulic Parts, Racer Machinery keeps the right units in stock and ships worldwide so your machine is back to work without delay.
