CUMMINS Turbocharger – Product Overview
A turbocharger uses exhaust gas energy to force additional air into the engine combustion chamber, increasing power output and improving fuel efficiency. It is a precision assembly consisting of a turbine wheel, compressor wheel, shaft, and bearing housing.
Applications
This Turbocharger is designed for CUMMINS construction equipment and industrial engines. It is compatible with a wide range of machine models and engine configurations. The component is manufactured to meet or exceed original equipment specifications for reliable performance in demanding operating conditions.
Compatible OEM Part Numbers
We supply the following comprehensive list of CUMMINS Turbocharger part numbers. These part numbers cover various machine models, engine configurations, and design revisions:
- Primary Part Number: Turbocharger 2881750
- Also Available: Turbocharger 3525720
- Also Available: Turbocharger 3528785
- Also Available: Turbocharger 3593680
- Also Available: Turbocharger 3593681
- Also Available: Turbocharger 3596623
- Also Available: Turbocharger 3780338
- Also Available: Turbocharger 3802301
- Also Available: Turbocharger 3802649
- Also Available: Turbocharger 3802767
- Also Available: Turbocharger 3802810
- Also Available: Turbocharger 3804567
- Also Available: Turbocharger 3960404
- Also Available: Turbocharger 4021810
- Also Available: Turbocharger 4029184
- Also Available: Turbocharger 4036823
- Also Available: Turbocharger 4041159
- Also Available: Turbocharger 4047354
- Also Available: Turbocharger 4050236
- Also Available: Turbocharger 4089393
- Also Available: Turbocharger 4089551
- Also Available: Turbocharger 4089862
- Also Available: Turbocharger 4090009
- Also Available: Turbocharger 4955241
- Also Available: Turbocharger 4955508
- Also Available: Turbocharger 4955714
- Also Available: Turbocharger 4955746
- Also Available: Turbocharger 4956076
- Also Available: Turbocharger Assy 3599728
- Also Available: Turbocharger HE500WG 5327805
If your specific part number is not listed, please contact our sales team with your machine model and serial number. We can source most part numbers with short lead times.
Technical Specifications
- Product Type: Exhaust Gas Turbocharger
- Bearing Type: Floating journal bearing / Ball bearing
- Housing Material: High-temperature cast iron / Ni-resist
- Turbine Wheel: Inconel or GMR-235 alloy
- Quality: OEM specification or premium aftermarket
Installation Guide
- Ensure the machine is on level ground, engine off, and all systems are safely depressurized before starting work.
- Clean the area around the component thoroughly to prevent contamination during removal and installation.
- Refer to the manufacturer service manual for the specific removal and installation procedure.
- Use proper tools and lifting equipment as specified in the service manual.
- Replace all gaskets, seals, and O-rings with new ones during installation.
- Tighten all fasteners to the manufacturer’s specified torque values using a calibrated torque wrench.
- After installation, check for proper operation and leaks before returning the machine to service.
- Perform a test run at low speed and gradually increase to normal operating speed.
Price Range
$600 – $4,500 USD per unit (depending on size and brand)
Volume discounts are available for fleet operators and repair shops. Contact our sales team for a firm quote based on your specific part number and quantity requirements.
Maintenance Tips
- Allow engine to idle for 2-3 minutes before shutdown to cool the turbo bearings.
- Use the correct grade of engine oil and maintain proper oil change intervals.
- Check turbocharger boost pressure regularly.
- Inspect intake and exhaust piping for leaks or restrictions.
- Listen for unusual whining or grinding noises from the turbo.
- Check shaft play during scheduled maintenance – excessive play indicates bearing wear.
Warranty
All products supplied by us are covered by a 12-month warranty against manufacturing defects in materials and workmanship. The warranty covers replacement or repair at our discretion. Proper installation by a qualified technician and adherence to the recommended maintenance schedule are required for warranty validity.
Shipping and Delivery
In-stock items ship within 24-48 hours via express freight (DHL, FedEx, or UPS). Standard delivery time is 5-10 business days worldwide. Expedited shipping options are available upon request. All shipments are fully insured and include tracking information.
Why Choose Our Products?
- Direct OEM replacement with guaranteed fitment and performance
- Rigorous quality testing before shipment
- Competitive pricing with factory-direct supply chain
- Technical support available for installation and troubleshooting
- Proven reliability with thousands of units supplied worldwide
Related Product Images
